Commercial Hardwood Floor Water Damage Repair

The price for mending hardwood floors damaged by water can vary. It might be from 200 to 500 dollars for minor repairs. But if the damage is more extensive, you could be looking at between 1,000 and 2,500 dollars or more. Here is the main point:The problem's extent indicates the kind of fluctuations you're going to see in costs. Also, two other big factors are the kind of wood involved and your geographic location. Repair companies charge different prices, too.

Yes, it is often possible to repair water-damaged hardwood floors. First, they must be dried completely. Sometimes, it is necessary to use fans and heaters to help them along. If the wood is warped, sanding may help to make it smooth again. Also, certain damaged pieces may need to be replaced with new wood that matches the older flooring. In what seems like a lifetime ago, we used to help homeowners do just this, in part because we had tools (and know-how) for refinishing the new/old floors to the point that you couldn't tell any difference. Of course, these days, homeowners can (and should) handle such tasks themselves, since the tools (and know-how) are so widely available.

Water damage to a wood floor might be covered by insurance if it's caused by a sudden event, like a burst pipe or a leaking appliance. But if the damage happens gradually and is caused by something like not enough maintenance or a slow leak, it's likely not covered. Always check the details of your policy, or talk to your insurance company, to make sure you understand what's paid for and what's not.

Clean the area with a vinegar and water solution and let it dry thoroughly; then sand the area gently to remove urine stains and/or odor. Vacuum the area to remove dust. Stain the area with a matching stain and allow it to dry. Apply a clear finish to the sanded and stained area. If the only way to fix it is to replace a board, do so. Otherwise, call someone who can.

When water damages hardwood floors, whether to fix or swap them out hinges on a couple of things. If a tiny spot is in trouble, it might be cheaper to repair. That can mean sanding and refinishing the affected areas. But if the damage is severe, and the wood all wavy and moldy, it might just be smarter to replace it. New wood looks fresher and lasts longer. Cost both options out before you decide. Either way, think about how long the floor has left in it.

Certainly, it is possible to repair wood that has suffered from water damage, but the severity of the damage will dictate whether or not the wood can be saved. If the wood is slightly wet, it will likely dry out and remain functional. You may need to sand and refinish the surface to make it aesthetically pleasing once again. However, if the wood is not just wet, but swollen, and has been compromised (or is about to be) by rot, you are looking at a much more intensive (and, frankly, expensive) repair job—one that may well require you to replace the wood. Preventing further damage, fixing the source of the problem, and drying the wood are your top priorities.

Hardwood floors that cannot be refinished are usually those that have been refinished too many times before. With each refinishing, a small layer of wood is removed, and, obviously, floors that are already thin can't be sanded down again. Sanding down too far makes the refinishing process not only unsafe, but also impossible. Other floor types can't be refinished for obvious reasons, and thus we won't attempt to cover those. 1. Laminate can't be refinished because it's not solid wood.2. Engineered hardwood might have a top layer that's too thin to refinish. 3. Floors with severe visible damage (e.g. deep warping or water damage) may be damaged structurally. 4. Finally, termite-ridden floors have no chance of surviving without significant structural repair.

Refinishing 1000 square feet of hardwood flooring costs can vary significantly due to several factors. Generally, you might expect to pay something like $3-$8 per square foot, which would put the total somewhere in the range of $3000-$8000. If your floor is in decent shape and you just want a standard refinishing job, then you're probably in this price range. However, if your floor is really beat up, or if you're looking for something with a bit more flair, then your costs could easily go higher. On top of that, you might need to factor in some costs for moving furniture and possibly removing any old flooring that could add to the cost.

If hardwood floors are already too thin or damaged, they cannot be refinished. If they have been sanded too many times, they might be too thin to sand again. Deep cracks, water stains, or wood warped from water damage might render the wood unfishable by refinishing. Sometimes, the best option is to replace the boards if they are too worn out or if the damage is too severe. Furthermore, some kinds of hardwood floor, like engineered wood with a very thin top layer, cannot be sanded and refinished like solid wood.

Floors made of hardwood in various shades of brown and natural wood colors are always in style. These tones provide a classic appearance that coordinates with a wide range of room styles and furnishings. They also render rooms warm and welcoming, which is why so many people are partial to this look. Lighter tones of brown and honey colors can make a room feel spacious and bright; darker browns add a coziness and elegance that you might associate with a library. Since these colors are basically neutral, they pair with almost anything and always look terrific.